Harvey Hv3 Water Softener Installation Manual

: Push the flexible plastic drain hose into the quick-fit center drain connection. Route this line to your upstand or outside drain. ⚠️ Critical : Ensure a minimum

With the bypass and outlet valves closed, slowly open the inlet valve. Open the outlet valve and a nearby soft water tap for a few minutes to flush the pipework and check for leaks. Manual Fill: harvey hv3 water softener installation manual

Example:

: Ensure you have a standard bypass valve set and WRAS-approved flexible hoses . 2. Plumbing Installation : Push the flexible plastic drain hose into

| Problem | Likely Cause | Fix | |---------|--------------|-----| | No regeneration | Low water pressure | Check pressure >1.4 bar | | Hard water leaking through | Bypass open or internal seal failure | Check bypass; call Harvey | | Water runs to drain constantly | Dirt in piston or damaged seal | Clean valve; replace seal | | Brine tank overflows | Stuck float valve | Clean or replace float assembly | | Salty taste in water | Blend valve too closed or low pressure | Open bypass slightly | Open the outlet valve and a nearby soft