: The scale is emptied. The indicator records the "dead load" (the weight of the empty platform) and sets this electrical value to 0.00. Span Calibration
: Once the display reads "done" , remove the weight. Press the Test button to restart the scale and return to normal weighing mode. avery berkel l126 calibration
The is a robust, waterproof stainless steel digital indicator designed for basic weighing in harsh or hygienic environments. Calibrating this unit ensures it maintains its 6000-division performance accuracy. Calibration Pre-Check Before starting, ensure the following: : The scale is emptied
: After saving, the weight is removed and reapplied to ensure the reading is repeatable and accurate. Technical Resources Press the Test button to restart the scale
| Error | Meaning | Fix | |-------|---------|-----| | | Zero point unstable | Clean platter, check for vibration/wind, check load cell wiring | | Err 1 | Calibration weight incorrect | Use certified weight; ensure weight matches requested value | | Err 4 | Load cell signal out of range | Bad load cell or PCB; check connections | | CAL E | Scale needs calibration | Follow full procedure above |
: A known "Span Weight" (often full capacity) is placed on the scale. The technician enters the numerical value of this weight into the indicator, which then maps the current electrical signal to that value. Verification
Locate the SW1 button on the bottom of the scale. Use a pen or small tool to press it. The display should read "DIAG" .