Dvb01 User — Manual |top|

Adjustable from 0 to 99.9 seconds for both relay activation and deactivation. Wiring Instructions

: If the DVB01 and the load share the same power supply, it is recommended to use separate wiring or add a shunt capacitor (470uF/35V or higher) to prevent voltage drops that could reset the module during high-current startups. Dimensions : The module is compact, measuring approximately 68 x 44 x 17 mm dvb01 user manual

If the module and the load share the same power supply, high-current loads (like motors) can cause a voltage drop that resets the DVB01. Solutions: Use separate wiring for the module and the load. Adjustable from 0 to 99

Adjustable pull-in and disconnect delay from 0 to 99.9 seconds . Operating Modes (5 Main Functions) Solutions: Use separate wiring for the module and the load

Relay closes when the voltage is above the upper limit and opens when it falls below the lower limit. F-04 (In-Interval Pull-in):

Relay closes below lower limit, opens above upper limit.

For detailed technical diagrams and setup instructions, you can view the DVB01 User Manual on the Class B Forum Scribd User Manual program one of the five functions