Life Probo Pr70 Instructions For Installation Use And Maintenance Manual 10 Pages Upd !!exclusive!! Direct
| Code | Meaning | User Action | |------|---------|--------------| | | Low inlet pressure (<20 psi) | Open water valve fully; check for kinked hose. | | E02 | Filter bypass | Re-seat PR70-P1. Press SET to reset. | | E03 | UV lamp failure | Replace PR70-P3 lamp. Contact support if persistent. | | E04 | Fan motor stuck (air version) | Remove obstruction from grille. Power cycle. | | E05 | TDS sensor drift | Run calibration with provided solution (see 8.2). | | E07 | Internal leak detected | Unplug immediately. Call service. | | F01 | Firmware mismatch | Re-run USB update from Page 5. |
Open the gate to the desired point, position the opening mechanical stop against the carriage, and secure it. Atu Tech - A2T.ro 3. Electrical Connections & Programming | Code | Meaning | User Action |
Firmly fix the runner to the ceiling, ensuring it is level and aligned. Mechanical Stops | | E03 | UV lamp failure | Replace PR70-P3 lamp
✅ Use PTFE tape on threads, but not on compression fittings. Power cycle
Check your package contains:
Three Headed Blackjack
Poker Star
Wild West Solitaire
Uno 4 Colors
Freecell Solitaire