| Problem | Likely Cause | Solution | |---------|--------------|----------| | Image shows garbage (vertical stripes) | Wrong scan mode | Change "Scan mode" to Horizontal or Vertical | | Colors are inverted | RGB/BGR order mismatch | Enable "RGB -> BGR swap" in Image2LCD | | First half of image is fine, rest is shifted | Incorrect column/page addressing | Verify your LCD's column end address matches width-1 | | Register code is huge for tiny screen | Included unnecessary init commands | Generate only pixel data (disable "Include init sequence") | | Nothing displays | Missing charge pump command (OLED) | Ensure 0x8D, 0x14 (charge pump) is present in the register code |
while(1) // ...
: Vertical or Horizontal (must match your driver's set address logic). image2lcd register code
It sounds like you're looking for a guide or explanation regarding for Image2LCD — a popular tool used to convert images into data arrays for embedded displays (OLED, TFT, LCD) driven by microcontrollers. | Problem | Likely Cause | Solution |
If your image appears like a "negative" on the screen, toggle the Color Inversion setting before saving. If your image appears like a "negative" on
Registration is primarily required to stop the software from embedding its name into your converted .c or .bin files.