^new^ | Lovely Craft Piston Trap Wiki Free

Go to Layer 2 (one block below the surface). Place facing upward in a 2x2 grid.

Dig two blocks into the floor or ceiling where you want the barrier to appear. Place the sticky pistons facing toward the hallway path. Attach your chosen building blocks to the sticky side of the pistons. 3. Wire the Mechanism Connect to the back of each piston. lovely craft piston trap wiki free

Place four Sticky Pistons in a 2x2 square facing the direction the door will open. Then, place two more Sticky Pistons on the side, facing inward towards the hallway. Step B: Adding the Surface Go to Layer 2 (one block below the surface)

(Match these to your base walls for a seamless look) 🛠️ Step-by-Step Instructions 1. Prepare the Entrance Place the sticky pistons facing toward the hallway path

Put one Sticky Piston in each of the four outer slots, facing upward .

Connect the circuit to a hidden lever or a pressure plate. When the signal is received, the pistons will retract the wall blocks and then pull them aside, creating a seamless opening. 4. Customization and Wiki-Style Variations