G41tad V10 Motherboard Manual Work Direct

If the time/date resets every time you unplug the PC, replace the CR2032 coin battery.

2 x 240-pin DDR3 DIMM slots (Supports up to 8GB total; 1333/1066/800 MHz) Form Factor: DTX/Micro-ATX (approx. 203mm x 244mm) Integrated Graphics: Intel GMA X4500 (DirectX 10 support) Audio: Realtek ALC662 6-Channel High Definition Audio LAN: Realtek RTL8111B Gigabit Ethernet Front Panel Header (F_PANEL) Pinout g41tad v10 motherboard manual work

The standard 9-pin header (PWR_SW, HDD_LED, RESET) is laid out in the manual on page 22 (OEM version). If the time/date resets every time you unplug

Tip: If you aren't sure, the Power Switch pins are the only ones that actually "start" the board when momentarily shorted with a screwdriver. 3. Essential Installation Steps Tip: If you aren't sure, the Power Switch

Ensure the VGA cable is firmly connected. If using a dedicated graphics card in the PCIe x16 slot , check the BIOS settings to ensure it isn't set to "Onboard Only".

The G41TAD requires two power inputs to POST (Power On Self Test): A 24-pin ATX power connector.