Xycd60 Manual Access
). If the voltage doesn't reach the target within this time, the relay will automatically open. Long-press again to save and exit. Key Features Wide Compatibility: Supports 12V, 24V, 36V, and 48V battery banks. LCD Display: Shows real-time voltage, time, and percentage. Serial Control (UART):
| Code | Function | Description | Range/Default | | :--- | :--- | :--- | :--- | | | Heating / Cooling Mode | Sets the relay to activate on temperature drop (Heating) or rise (Cooling). | H (Heating) / C (Cooling) | | P1 | Hysteresis (Dead Band) | The difference between stopping and starting. If set to 2.0°C, the relay activates at Set Temp - 2°C (Heating mode). | 0.1°C – 15.0°C | | P2 | Delay Protection | Prevents rapid cycling of compressor/relay. (e.g., wait 3 minutes before restarting). | 0 – 10 Minutes | | P3 | High Alarm | Audible alarm triggers if temp exceeds this limit. | Off / Temp Value | | P4 | Low Alarm | Audible alarm triggers if temp drops below this limit. | Off / Temp Value | | P5 | Calibration | Corrects sensor reading errors. If actual temp is 25°C and display shows 24°C, set P5 to +1.0. | -5.0°C to +5.0°C | xycd60 manual
specifies a voltage calibration function to sync the module with the actual battery state. 5. Safety and Installation Best Practices According to documentation from AliExpress retailers , proper configuration is essential: Reverse Polarity: Key Features Wide Compatibility: Supports 12V, 24V, 36V,