V-shaped dipole (e.g., flat copper strips) typically built into the airframe or canard for specialized aircraft. Cabling: Use RG-58 A/U coax for connections. 4. Operational Functions
He sat down on his designer sofa, the manual on his lap. Outside, the projection of the private beach flickered, revealing for a split second the real city: gray, rainy, and utterly silent. Then the image snapped back, more vibrant than ever. The bass from the club downstairs had been replaced by the smooth, synthesized beat of “Polvo de Estrellas.”
The unit uses a multi-pin for primary electrical and audio interfaces. For a standard 14V system, pins 8 and 10 must be jumpered. Wiring Specification 1 & 2 +14/28V Power Input 18 AWG Red 3 & 4 Airframe Ground 18 AWG Black 5 Low-Level Audio 20 AWG Green 6 Headphones Audio 20 AWG Blue (50 mW high-level output) 8 Switched A+ 18 AWG White/Red 9 Transmitter Key 20 AWG White 11 Mike Audio 20 AWG Brown 12 Intercom Key 20 AWG Yellow (available at pin 12) 13 Mike/Phones Ground 20 AWG Black Installation Guidelines
The AeroElectric Escort II Pinout provides the full 13-pin connector layout.
: Standard 14V DC (Note: For 14V aircraft, you must jumper pins 8 and 10 on the P301 connector).